37 Important Linux Commands You Should Know
Are you new to Linux or just a little rusty? Here are all the commands you’ll need to know. Think of this as an essential reference for the Linux terminal. This applies to the macOS command line, too.
The Essential Toolkit for the Terminal
Linux includes a large number of commands, but we’ve chosen 37 of the most important ones to present here. Learn these commands, and you’ll be much more at home at the Linux command prompt.
The below list is presented in alphabetical order. A command’s
position in the list is not representative of its usefulness or
simplicity. For the final word on a command’s usage, refer to its man
man command is in our list, of course—it’s short for “manual.”
The alias command lets you give your own name to a command or sequence of commands. You can then type your short name, and the shell will execute the command or sequence of commands for you.
This sets up an alias called
cls . It will be another name for
clear . When you type
cls, it will clear the screen just as though you had typed
. Your alias saves a few keystrokes, sure. But, if you frequently move
between Windows and Linux command line, you can find yourself typing the
cls command on a Linux machine that doesn’t know what you mean. Now it will know.
Aliases can be much more intricate than that simple example. Here’s an alias called
(for process find) that is just a little more complex. Note the use of
quotation marks around the command sequence. This is required if the
command sequence has spaces in it. This alias uses the
ps command to list the running processes and then pipes them through the
grep command. The
grep command looks for entries in the output from
ps that match the command line parameter
alias pf="ps -e | grep $1"
If you wanted to discover the process ID (PID) of the
shutter process—or to find out if
shutter was even running—you could use the alias like this. Type
pf, a space, and the name of the process you are interested in:
Aliases defined on the command line will die with the terminal
window. When you close it, they are gone. To make your aliases always be
available to you, add them to the
.bash_aliases file in your home directory.
cat command (short for “concatenate”) lists the
contents of files to the terminal window. This is faster than opening
the file in an editor, and there’s no chance you can accidentally alter
the file. To read the contents of your
.bash_log_out file, type the following command while the home directory is your current working directory, as it is by default:
With files longer than the number of lines in your terminal window,
the text will whip past too fast for you to read. You can pipe the
less to make the process more manageable. With
you can scroll forward and backward through the file using the Up and
Down Arrow keys, the PgUp and PgDn keys, and the Home and End keys. Type
q to quit from less.
cat .bashrc | less
cd command changes your current directory. In other words, it moves you to a new place in the filesystem.
If you are changing to a directory that is within your current directory, you can simply type
cd and the name of the other directory.
If you are changing to a directory elsewhere within the filesystem directory tree, provide the path to the directory with a leading /.
To quickly return to your home directory, use the
~ (tilde) character as the directory name.
Here’s another trick: You can use the double dot symbol
.. to represent the parent of the current directory. You can type the following command to go up a directory:
Imagine you are in a directory. The parent directory has other
directories in it, as well as the directory you’re currently in. To
change into one of those other directories, you can use the
.. symbol to shorten what you have to type.
chmod command sets the file permissions flags on a file or folder. The flags define who can read, write to or execute the file. When you list files with the
-l (long format) option you’ll see a string of characters that look like
If the first character is a
- the item is a file, if it is a
the item is a directory. The rest of the string is three sets of three
characters. From the left, the first three represent the file
permissions of the owner, the middle three represent the file permissions of the group and the rightmost three characters represent the permissions for others. In each set, an
r stands for read, a
w stands for write, and an
x stands for execute.
x character is present that file permission is granted. If the letter is not present and a
- appears instead, that file permission is not granted.
One way to use
chmod is to provide the permissions you
wish to give to the owner, group, and others as a 3 digit number. The
leftmost digit represents the owner. The middle digit represents the
group. The rightmost digit represents the others. The digits you can use
and what they represent are listed here:
- 0: No permission
- 1: Execute permission
- 2: Write permission
- 3: Write and execute permissions
- 4: Read permission
- 5: Read and execute permissions
- 6: Read and write permissions
- 7: Read, write and execute permissions
Looking at our example.txt file, we can see that all three sets of characters are
rwx. That means everyone has read, write and execute rights with the file.
To set the permission to be read, write, and execute (7 from our list) for the owner; read and write (6 from our list) for the group; and read and execute (5 from our list) for the others we’d need to use the digits 765 with the
chmod -R 765 example.txt
To set the permission to be read, write and execute (7 from our list) for the owner, and read and write (6 from our list) for the group and for the others we’d need to use the digits 766 with the
chmod 766 example.txt
chown command allows you to change the owner and group owner of a file. Listing our example.txt file with
ls -l we can see
dave dave in the file description. The first of these indicates the name of the file owner, which in this case is the user
dave. The second entry shows that the name of the group owner is also
Each user has a default group created when the user is created. That
user is the only member of that group. This shows that the file is not
shared with any other groups of users.
You can use
chown to change the owner or group, or both of a file. You must provide the name of the owner and the group, separated by a
: character. You will need to use
sudo. To retain dave as the owner of the file but to set mary as the group owner, use this command:
sudo chown dave:mary example.txt
To change both the owner and the group owner to mary, you would use the following command;
sudo chown mary:mary example.txt
To change the file so that dave is once more the file owner and the group owner, use this command:
sudo chown dave:dave example.txt
curl command is a tool to retrieve information and files from Uniform Resource Locators (URLs) or internet addresses.
curl command may not be provided as a standard part of your Linux distribution. Use
install this package onto your system if you’re using Ubuntu or another
Debian-based distribution. On other Linux distributions, use your Linux
distribution’s package management tool instead.
sudo apt-get install curl
Suppose you want to retrieve a single file from a GitHub repository.
There is no officially supported way to this. You’re forced to clone the
entire repository. With
curl however, we can retrieve the file we want on its own.
This command retrieves the file for us. Note that you need to specify the name of the file to save it in, using the
(output) option. If you do not do this, the contents of the file are
scrolled rapidly in the terminal window but not saved to your computer.
curl https://raw.githubusercontent.com/torvalds/linux/master/kernel/events/core.c -o core.c
If you don’t want to see the download progress information use the
-s (silent) option.
curl -s https://raw.githubusercontent.com/torvalds/linux/master/kernel/events/core.c -o core.c
df command shows the size, used space, and available space on the mounted filesystems of your computer.
Two of the most useful options are the
-h (human readable) and
(exclude) options. The human-readable option displays the sizes in Mb
or Gb instead of in bytes. The exclude option allows you to tell
df to discount filesystems you are not interested in. For example, the
squashfs pseudo-filesystems that are created when you install an application with the
df -h -x squashfs
diff command compares two text files and shows the differences between them. There are many options to tailor the display to your requirements.
-y (side by side) option shows the line differences side by side. The
(width) option lets you specify the maximum line width to use to avoid
wraparound lines. The two files are called alpha1.txt and alpha2.txt in
this example. The
diff from listing the matching lines, letting you focus on the lines which have differences.
diff -y -W 70 alpha1.txt alpha2.txt --suppress-common-lines
echo command prints (echoes) a string of text to the terminal window.
The command below will print the words “A string of text” on the terminal window.
echo A string of text
echo command can show the value of environment variables, for example, the
environment variables. These hold the values of the name of the user,
the user’s home directory, and the path searched for matching commands
when the user types something on the command line.
The following command will cause a bleep to be issued. The
-e (escape code) option interprets the escaped a character as a ‘bell’ character.
echo -e "\a"
echo command is also invaluable in shell scripts. A
script can use this command to generate visible output to indicate the
progress or results of the script as it is executed.
The exit command will close a terminal window, end the execution of a shell script, or log you out of an SSH remote access session.
find command to track down files that you know exist if you can’t remember where you put them. You must tell
find where to start searching from and what it is looking for. In this example, the
. matches the current folder and the
-name option tells
find to look for files with a name that matches the search pattern.
You can use wildcards, where
* represents any sequence of characters and
? represents any single character. We’re using
*ones* to match any file name containing the sequence “ones.” This would match words like bones, stones, and lonesome.
find . -name *ones*
As we can see,
find has returned a list of matches. One of them is a directory called Ramones. We can tell
find to restrict the search to files only. We do this using the
-type option with the
f parameter. The
f parameter stands for files.
find . -type f -name *ones*
If you want the search to be case insensitive use the
-iname (insensitive name) option.
find . -iname *wild*
finger command gives you a short dump of information
about a user, including the time of the user’s last login, the user’s
home directory, and the user account’s full name.
free command gives you a summary of the memory usage
with your computer. It does this for both the main Random Access Memory
(RAM) and swap memory. The
-h (human) option is used to provide human-friendly numbers and units. Without this option, the figures are presented in bytes.
grep utility searches for lines which contain a search pattern. When we looked at the alias command, we used
grep to search through the output of another program,
ps . The
command can also search the contents of files. Here we’re searching for
the word “train” in all text files in the current directory.
grep train *.txt
The output lists the name of the file and shows the lines that match. The matching text is highlighted.
The functionality and sheer usefulness of
grep definitely warrants you checking out its man page.
groups command tells you which groups a user is a member of.
gzip command compresses files. By default, it
removes the original file and leaves you with the compressed version. To
retain both the original and the compressed version, use the
-k (keep) option.
gzip -k core.c
head command gives you a listing of the first 10 lines of a file. If you want to see fewer or more lines, use the
-n (number) option. In this example, we use
head with its default of 10 lines. We then repeat the command asking for only five lines.
head -n 5 core.c
The history command lists the commands you have previously issued on
the command line. You can repeat any of the commands from your history
by typing an exclamation point
! and the number of the command from the history list.
Typing two exclamation points repeats your previous command.
kill command allows you to terminate a process from
the command line. You do this by providing the process ID (PID) of the
kill. Don’t kill processes willy-nilly. You need to have a good reason to do so. In this example, we’ll pretend the
shutter program has locked up.
To find the PID of
shutter we’ll use our
grep trick from the section about the
alias command, above. We can search for the
shutter process and obtain its PID as follows:
ps -e | grep shutter.
Once we have determined the PID—1692 in this case—we can kill it as follows:
less command allows you to view files without
opening an editor. It’s faster to use, and there’s no chance of you
inadvertently modifying the file. With
less you can scroll
forward and backward through the file using the Up and Down Arrow keys,
the PgUp and PgDn keys and the Home and End keys. Press the Q key to
To view a file provide its name to
less as follows:
You can also pipe the output from other commands into
less. To see the output from
ls for a listing of your entire hard drive, use the following command:
ls -R / | less
/ to search forward in the file and use
? to search backward.
This might be the first command the majority of Linux users meet. It
lists the files and folders in the directory you specify. By default,
ls looks in the current directory. There are a great many options you can use with
ls , and we strongly advise reviewing its the man page. Some common examples are presented here.
To list the files and folders in the current directory:
To list the files and folders in the current directory with a detailed listing use the
-l (long) option:
To use human-friendly file sizes include the
-h (human) option:
To include hidden files use the
-a (all files) option:
The man command displays the “man pages” for a command in
less . The man pages are the user manual for that command. Because
less to display the man pages, you can use the search capabilities of
For example, to see the man pages for
chown, use the following command:
Use the Up and Down arrow or PgUp and PgDn keys to scroll through the document. Press
q to quit the man page or press
h for help.
mkdir command allows you to create new directories in the filesystem. You must provide the name of the new directory to
mkdir. If the new directory is not going to be within the current directory, you must provide the path to the new directory.
To create two new directories in the current directory called “invoices” and “quotes,” use these two commands:
To create a new directory called “2019” inside the “invoices” directory, use this command:
If you are going to create a directory, but its parent directory does not exist, you can use the
-p (parents) option to have
create all of the required parent directories too. In the following
command, we are creating the “2019” directory inside the “yearly”
directory inside the “quotes” directory. The “yearly” directory does not
exist, but we can have
mkdir create all the specified directories at once:
mkdir -p quotes/yearly/2019
The “yearly” directory is also created.
mv command allows you to move files and directories from directory to directory. It also allows you to rename files.
To move a file you must tell
mv where the file is and where you want it to be moved to. In this example, we’re moving a file called
apache.pdf from the “~/Document/Ukulele” directory and placing it in the current directory, represented by the single
mv ~/Documents/Ukulele/Apache.pdf .
To rename the file, you “move” it into a new file with the new name.
mv Apache.pdf The_Shadows_Apache.pdf
The file move and rename action could have been achieved in one step:
mv ~/Documents/Ukulele/Apache.pdf ./The_Shadows_Apache.pdf
passwd command lets you change the password for a user. Just type
passwd to change your own password.
You can also change the password of another user account, but you must use
sudo. You will be asked to enter the new password twice.
sudo passwd mary
ping command lets you verify that you have network
connectivity with another network device. It is commonly used to help
troubleshoot networking issues. To use
ping, provide the IP address or machine name of the other device.
ping command will run until you stop it with Ctrl+C.
Here’s what’s going on here:
- The device at IP address 192.168.4.18 is responding to our ping requests and is sending back packets of 64 bytes.
- The Internet Control Messaging Protocol (ICMP) sequence numbering allows us to check for missed responses (dropped packets).
- The TTL figure is the “time to live” for a packet. Each time the packet goes through a router, it is (supposed to be) decremented by one. If it reaches zero the packet is thrown away. The aim of this is to prevent network loopback problems from flooding the network.
- The time value is the duration of the round trip from your computer to the device and back. Simply put, the lower this time, the better.
ping to run for a specific number of ping attempts, use the
-c (count) option.
ping -c 5 192.168.4.18
To hear a ping, use the
-a (audible) option.
ping -a 192.168.4.18
ps command lists running processes. Using
ps without any options causes it to list the processes running in the current shell.
To see all the processes related to a particular user, use the
-u (user) option. This is likely to be a long list, so for convenience pipe it through
Version:1.0 StartHTML:000000240 EndHTML:000090778 StartFragment:000073456 EndFragment:000090705 StartSelection:000073456 EndSelection:000090699 SourceURL:https://www.howtogeek.com/412055/37-important-linux-commands-you-should-know/ 37 Important Linux Commands You Should Know
Nice and simple, the
pwd command prints the working directory (the current directory) from the root / directory.
The shutdown command lets you shut down or reboot your Linux system.
shutdown with no parameters will shut down your computer in one minute.
To shut down immediately, use the
You can also schedule a shutdown and inform any logged in users of the pending shutdown. To let the
shutdown command know when you want it to shut down, you provide it with a time. This can be a set number of minutes from now, such as
+90 or a precise time, like
23:00. Any text message you provide is broadcast to logged in users.
shutdown 23:00 Shutdown tonight at 23:00, save your work and log out before then!
To cancel a shutdown, use the
-c (cancel) option. Here we have scheduled a shutdown for fifteen minutes time from now—and then changed our minds.
shutdown +15 Shutting down in 15 minutes!
Use the ssh command to make a connection to a remote Linux computer and log into your account. To make a connection, you must provide your user name and the IP address or domain name of the remote computer. In this example, the user mary is logging into the computer at 192.168.4.23. Once the connection is established, she is asked for her password.
Her user name and password are verified and accepted, and she is logged in. Notice that her prompt has changed from “Nostromo” to “howtogeek.”
Mary issues the
w command to list the current users on “howtogeek” system. She is listed as being connected from pts/1, which is a pseudo-terminal slave. That is, it is not a terminal directly connected to the computer.
To close the session, mary types
exit and is returned to the shell on the “Nostromo” computer.
sudo command is required when performing actions that require root or superuser permissions, such as changing the password for another user.
sudo passwd mary
tail command gives you a listing of the last 10 lines of a file. If you want to see fewer or more lines, use the
-n (number) option. In this example, we use
tail with its default of 10 lines. We then repeat the command asking for only five lines.
tail -n 5 core.c
tar command, you can create an archive file (also called a tarball) that can contain many other files. This makes it much more convenient to distribute a collection of files. You can also use
tar to extract the files from an archive file. It is common to ask
tar to compress the archive. If you do not ask for compression, the archive file is created uncompressed.
To create an archive file, you need to tell
tar which files to include in the archive file, and the name you wish the archive file to have.
In this example, the user is going to archive all of the files in the Ukulele directory, which is in the current directory.
They have used the
-c (create) option and the
-v (verbose) option. The verbose option gives some visual feedback by listing the files to the terminal window as they are added to the archive. The
-f (filename) option is followed by the desired name of the archive. In this case, it is
tar -cvf songs.tar Ukulele/
The files are listed to the terminal window as they are added to the archive file.
There are two ways to tell
tar that you want the archive file to be compressed. The first is with the
-z (gzip) option. This tells tar to use the
gzip utility to compress the archive once it has been created.
It is usual to add “.gz” as suffix to this type of archive. That allows anyone who is extracting files from it to know which commands to pass to
tar to correctly retrieve the files.
tar -cvzf songs.tar.gz Ukulele/
The files are listed to the terminal window as they are added to the archive file as before, but the creation of the archive will take a little longer because of the time required for the compression.
To create an archive file that is compressed using a superior compression algorithm giving a smaller archive file use the
-j (bzip2) option.
tar -cvjf songs.tar.bz2 Ukulele/
Once again, the files are listed as the archive is created. The
-j option is noticeably slower than the
If you are archiving a great many files, you must choose between the
-z option for decent compression and reasonable speed, or the
-j option for better compression and slower speed.
As can be seen in the screenshot below, the “.tar” file is the largest, the “.tar.gz” is smaller, and the “.tar.bz2” is the smallest of the archives.
To extract files from an archive file use the
-x (extract) option. The
-v (verbose) and
-f (filename) options behave as they do when creating archives. Use
ls to confirm which type of archive you are going to extract the files from, then issue the following command.
tar -xvf songs.tar
The files are listed as they are extracted. Note that the Ukulele directory is also recreated for you.
To extract files from a “.tar.gz” archive, use the
-z (gzip) option.
tar -xvzf songs.tar.gz
Finally, to extract files from a “.tar.bz2” archive use the
-j option instead of the
-z (gzip) option.
tar -xvjf songs.tar.bz2
top command shows you a real-time display of the data relating to your Linux machine. The top of the screen is a status summary.
The first line shows you the time and how long your computer has been running for, how many users are logged into it, and what the load average has been over the past one, five, and fifteen minutes.
The second line shows the number of tasks and their states: running, stopped, sleeping and zombie.
The third line shows CPU information. Here’s what the fields mean:
- us: value is the CPU time the CPU spends executing processes for users, in “user space”
- sy: value is the CPU time spent on running system “kernel space” processes
- ni: value is the CPU time spent on executing processes with a manually set nice value
- id: is the amount of CPU idle time
- wa: value is the time the CPU spends waiting for I/O to complete
- hi: The CPU time spent servicing hardware interrupts
- si: The CPU time spent servicing software interrupts
- st: The CPU time lost due to running virtual machines (“steal time”)
The fourth line shows the total amount of physical memory, and how much is free, used and buffered or cached.
The fifth line shows the total amount of swap memory, and how much is free, used and available (taking into account memory that is expected to be recoverable from caches).
The user has pressed the E key to change the display into more humanly digestible figures instead of long integers representing bytes.
The columns in the main display are made up of:
- PID: Process ID
- USER: Name of the owner of the process
- PR: Process priority
- NI: The nice value of the process
- VIRT: Virtual memory used by the process
- RES: Resident memory used by the process
- SHR: Shared memory used by the process
- S: Status of the process. See the list below of the values this field can take
- %CPU: the share of CPU time used by the process since last update
- %MEM: share of physical memory used
- TIME+: total CPU time used by the task in hundredths of a second
- COMMAND: command name or command line (name + options)
(The command column didn’t fit into the screenshot.)
The status of the process can be one of:
- D: Uninterruptible sleep
- R: Running
- S: Sleeping
- T: Traced (stopped)
- Z: Zombie
Press the Q key to exit from
You can obtain some system information regarding the Linux computer you’re working on with the
- Use the
-a(all) option to see everything.
- Use the
-s(kernel name) option to see the type of kernel.
- Use the
-r(kernel release) option to see the kernel release.
- Use the
-v(kernel version) option to see the kernel version.
w command lists the currently logged in users.
whoami to find out who you are logged in as or who is logged into an unmanned Linux terminal.